High Pressure, Plural Component, Direct Impingement Mix, Mechanical Purge

The MG Spray Gun is extremely simple to operate and it is the Most Compact, Lightest Weight, Most Maneuverable Spray Gun, with the lowest parts count in the industry.

  • Technical Information:

    Features:

    • Simple operation, easy set-up and maintenance
    • Versatile – Sprays Polyurea Coatings, Urethane, and Spray Foams
    • Inexpensive to service, industries lowest rebuild cost
    • Less than 5 minute clean up at the end of the day
    • Requires 3 minutes to change PCD
    • Will dispense materials at 1:1 through 4:1 ratios
    • Round Spray Pattern, Variable Flow rates from 1 lb/min to 23 lbs/min
    • Excellent Mix
    • Lowest Cost Mix Package (pattern control disc mix module)
    • Adapter blocks and fittings to connect to any make of proportioner
    • Coupling Block with material shut-off valves allows leakage free disconnect from gun
    • Extremely flexible 24” whip hose assembly
    • Valving Rod & PCD require no adjustment
    • Rebuild-able check valves



    Applications:

    • Shipboard / Offshore
    • Refinery / Pipe / Tank
    • Bridge / Architectural
    • Truck Bed Liners
    • Automotive Ground Effects
    • Secondary containment
    • In Mold Coatings, Scenic Theaming
    • Foam Insulation and Roofing
    • EPS hard-coating

     

    MG Spray Gun
    Specifications:

    • Introduced in 2010
    • High Pressure, Plural Component, Direct Impingement Mixing, Mechanical Purge
    • Minimum Material Output: 1lb./min (.4536 kg)
    • Maximum Material Output: 23 lbs./min (10.43 kg)
    • Small Size:
      • Height: 6 ½” (16.51 cm)
      • Width: 2” (5.08 cm)
      • Length: 2 ¾” (6.99 cm)
      • Weight: 1.9Lbs. (0.86kg)
      • Spray Tip to Rear of Gun: 3 1/8″ (7.94cm)
    • Air Requirement: 80-130 PSI (0.56 – 0.9 MPa, 5.6 – 9.0 bar)
    • Maximum Fluid Temperature: 200°F (94°C)
    • Maximum Fluid Working Pressure: 3500 psi (24.5 MPa, 245 bar)

    MG Spray Gun Model F16

     

  • ADAPTERS & FITTINGS Attaches Whip Hoses to:
    PSG7016Hose Adapter Fitting AssemblyGlascraft Style Whip Hoses
    PSG7017Hose Adapter Fitting AssemblyGraco / Gusmer Style Whip Hoses
    BD6000Adapter Block AssemblyGusmer Style Coupling Block
    BD6100Adapter Block AssemblyGraco Fusion Style Coupling Block
    BD6200Adapter Block AssemblyP-2 Side Block Assemblies
    PSG7018E10 RECIRC FITTING KITFitting for E10 Recirculation Hoses
    BD9042High Pressure Swivels
    PSG5009High Pressure Filter Swivel, With 60 Mesh Filter Cartridge

    MG ACCESSORIES  
    MG550090 Degree Fitting Kit
    Reduces size of spray gun for tight spaces.
     MG500 90 degree kit on MG Spray Gun
    MG3006Air Cylinder Repair KitIncludes:
     PSG3014 O-Ring1
     MG3010 O-Ring, Piston1
     MG3008 O-Ring, Rear Cover1
    MG9910O-Rings & Seal Kit 
     Complete replacement O-Ring set and a Rear Seal 
    MG9920MG Rebuild Kit – Handle 
    MG9930MG Rebuild Kit – Air Cylinder 
    MG9940MG & BD Rebuild Kit – Coupling Block / Whip Hose Assembly 
    MG9950MG Rebuild Kit – Complete

    Start Up Kits  
    MG3016-16Start Up KitIncludes:
     MG9001-16 Mix Module, Round Pattern, .0161
     MG9003-20 PCD, Round Pattern, .0241
     MG4003 O-Ring, Coupling Block6
     PSG2008 O-Ring6
     MG2021 Rear Seal1
     PSG2016A Basket Filter1
    MG3016Start Up Kit (Standard size in New Gun)Includes:
     MG9001-24 Mix Module, Round Pattern, .0241
     MG9003-24 PCD, Round Pattern, .0241
     MG4003 O-Ring, Coupling Block6
     PSG2008 O-Ring6
     MG2021 Rear Seal1
     PSG2016A Basket Filter1
    MG3016-24Start Up KitIncludes:
     MG9001-24 Mix Module, Round Pattern, .0241
     MG9003-36 PCD, Round Pattern, .0361
     MG4003 O-Ring, Coupling Block6
     PSG2008 O-Ring6
     MG2021 Rear Seal1
     PSG2016A Basket Filter1
    MG3016-37Start Up KitIncludes:
     MG9001-37 Mix Module, Round Pattern, .0371
     MG9003-47 PCD, Round Pattern, .0471
     MG4003 O-Ring, Coupling Block6
     PSG2008 O-Ring6
     MG2021 Rear Seal1
     PSG2016A Basket Filter1
    MG3016-52Start Up KitIncludes:
     MG9001-52 Mix Module, Round Pattern, .0521
     MG9003-60 PCD, Round Pattern, .0601
     MG4003 O-Ring, Coupling Block6
     PSG2008 O-Ring6
     MG2021 Rear Seal1
     PSG2016A Basket Filter1

    Drills & Pin Vises  
    PSG9015Drill Index, #80 – #61 Drill Bits
    BD9015Drill Index, #60 – #41 Drill Bits
    PSG9012Drill Bit, 7/64″ x 6″For Palm Gun
    PSG9014Drill Bit, .149For MG & BD Gun
    MG9041Drill Bit, 1/16″
    PSG9011Pin Vise Small, For # 61 – #80 Drill Bits
    BD9011Pin Vise Large, For 1/16” – ¼: Drill Bits

    Tools 
    BD9054Solvent Squeeze Bottle
    PSG9009Nut Driver, 5/16″
    PSG9010Combination Wrench, 5/16″

    Repair Kits  
    PSG3015Trigger O-Ring Repair KitIncludes:
     PSG2005 Spring, Spool Valve Return1
     PSG2025 O-Ring, Spool Valve6
    BD5307Check Valve Repair KitIncludes:
     BD5303 Ball, .2502
     BD5302 Ball Support2
     BD5304 Snap Ring, Internal2

  • Item #Part #DescriptionQty.
     MG1003MG Gun PackageIncludes:
     MG2100MG Spray Gun1
     MG5300Coupling Block/Whip Hose Assembly1
     MG9000Tool Kit1
     MG100Manual1

    Item #Part #DescriptionQty.
     MG9000Tool KitIncludes:
     BD9054Solvent Squeeze Bottle1
     PSG9012Drill Bit, 7/64″ x 6″1
     PSG9010Combination Wrench, 5/16″1
     PSG9009Nut Driver, 5/16″1
     PSG9011Pin Vise1
     MG9041Drill Bit, 1/16″1
     MG4003O-Ring, Coupling Block4
     PSG2008O-Ring3

    MG2000 Handle Assembly Completet

     MG2000Handle Assembly CompleteIncludes:
    1MG2001Gun Handle Bare1
    2PSG2016ABasket Filter2
    3MG2017Air Needle Valve1
    4MG4003O-Ring, Coupling Block2
     MG4003-PKG12 O-Rings for the price of 10 
    5PSG2005Spring, Spool Valve Return1
    6PSG2004Spool Valve1
    7PSG2007Washer1
    8PSG2006Button Head Cap Screw, 6-321
    9PSG2009Spring, Trigger Paddle1
    10BD2003Trigger Paddle1
    11PSG2014Set Screw, 8-322
    12BD2015Socket Head Set Screw, 10-321
    13MG9003-XXPCD, XX Orifice1
    14MG2002Air Cap1
    15PSG2012Air Cap Bolt2
    16BD2010Trigger Guard1
    17BD9045Button Head Cap Screw, 10-321
    18MG9044Plug, Finish1
    19PSG2008O-Ring3
     PSG2008-PKG12 O-Rings for the price of 10 
    20MG9001-XXModule, Round Pattern, XX Orifices1
    21PSG2011Dowel Pin, 1/8″ x 1 1/4″1
    22MG2021Rear Seal1
    23MG2022Rear Seal Packing Nut1

    MG3000 Air Cylinder Assemblyt

     MG3000Air Cylinder AssemblyIncludes:
    1MG3001Air Cylinder, Bare Assembly1
    8PSG2006Button Head Cap Screw, 6-322
    2PSG3014O-Ring1
     PSG3014-PKG12 O-Rings for the price of 10 
    3MG3012Piston & Shaft1
    4MG3010O-Ring, Piston1
     MG3010-PKG12 O-Rings for the price of 10 
    5MG4000Valving Rod1
    6MG4001Valving Rod Bolt1
    8MG3009Rear Cover1
    9PSG70041/8″ Pipe Nipple1
    10PSG5014Air Safety Valve1
    11BD9041Whip Hose, Air1
    12PSG7008Nipple, Male QD, 1/4 FPT1
    13MG3008Rear Cover O-Ring1
     MG3008-PKG12 O-Rings for the price of 10 
    14MG3004Pan Head Screw, 2″ Length4

    MG5300 Coupling Block Whip Hose Assemblyt

     MG5300Coupling Block / Whip Hose AssemblyIncludes:
    1MG5001Coupling Block – Machined & Plated1
    2PSG5003Coupling Block Bolt1
    3PSG5500Manual Valve Assembly2
    4BD5305Check Valve2
    5MG5007Whip Hose2

  • Note: MG Gun Package comes ready to spray with:
    MG9001-24 .024 Round Pattern Mix Module
    MG9003-24 .024 Round Pattern Pattern Control Disc

    MM&PCDt

    Part #DescriptionApprox. Output / Pattern At 24″Number Drill SizeCleanout Drill Size
    MG9001-16Module, Mix, Rnd Pattern, .0161.0 – 1.75 Lbs./Min780.016
    MG9003-20PCD, Round Pattern, .0204-6″760.02
         
    MG9001-16Module, Mix, Rnd Pattern, .0161.25 – 2.0 Lbs./Min.780.016
    MG9003-24PCD, Round Pattern, .0244-6″730.024
         
    MG9001-24Module, Mix, Rnd Pattern, .0242.5 – 4.0 Lbs./Min.730.024
    MG9003-24PCD, Round Pattern, .0244-6″730.024
         
    MG9001-24Module, Mix, Rnd Pattern, .0242.5 – 4.0 Lbs./Min.730.024
    MG9003-36PCD, Round Pattern, .0365-8″640.036
         
    MG9001-37Module, Mix, Rnd Pattern, .03710 – 18 Lbs./Min.630.037
    MG9003-47PCD, Round Pattern, .04712-16″Mar-640.0469
         
    MG9001-52Module, Mix, Rnd Pattern, .05218 – 25 Lbs./Min.550.052
    MG9003-60PCD, Round Pattern, .06014-21″530.0595

    Flow rates and pattern width is approximate, and will vary depending on material viscosity, temperature, and pressure.

Related Products:

BD6100300sqr Adaptors & Accessories

BD Spray Gun

BD Spray Gun

Graco Logo

 Graco Parts & Equipment